|Automatic Grad:||Automatic||Application:||Rigid Box Making And Hard Cover Making|
|Packaging Type:||Wood Case||Place Of Origin:||Guangdong, China (Mainland)|
cardboard grooving machine,
corner grooving machine
V Grooving Machine for cardboard / Board Slotting Machine
Automatic Grooving Machine catalog.pdf
Grooving Machine professor for Cover Paper 200gsm to 400gsm Cardbaordpaperboard ,MDF board ,Cardboard,ect, the machine adopts new type of cardboard convering ,the whole flat of paper board slot encase the 60 cm diameter roller surface ,the ensure accurate that the slot is accurate,no deviation and straight,has the characteristics of high precision,high speed,durable cutting tool. Cover Paper range from 200gsm to 400gsm.
1, slot effect: no burrs ,no dust, V Groove surface is smooth.
2, Environmental protection and energy saving: the total power consumption is 2.0 kw.been cut V groove material can recycle in whole( the cost can equal to power cost plus cutting tool cost) and low noise.
3, Production efficiency:manual plate feeding speed 8 hours can produce about 10000 boxes.
4, Durable cutting tool:with special knife grinder (simple),grind a knife only need 2 minutes,the client may sharpen yourself.
5, Adjustable cutter angle: two pieces of independent blade and fixture,different angles without customized blades,machine can adjust itself ,different cardboard thickness without adjustment can be slotted,use very convenient.
|Roating speed||30m /min|
|Deep of groove||1~4mm|
|Max. width of each group||900 mm|
|Max. width of board||800 mm|
|Feeder power||0.18 KW|
|Speed of feeder||0~180pcs/min(adjust)|
|Travel of feeder||185mm|
|Power of conveyor belt||0.18 KW|
1. After notching, the surface of cardboard is very clean and no dust.
2. The machine is very Economic, total power is 2.2KW only and it is little noise.
3. The machine can produce about 1000 pcs boxes per hour that feeding by hand,it is very fast.
4. The cutting blade can cut 8000-12000 sheets one time, then you should to sharp the blade and it is takes about two minutes only. We will supply a sharpen machine by free and it’s very easy to operation.
5. The machine could groove any thickness from 300gsm-3.6mm.
6. It adopts new way of transportation principle. Wrap the cardboard on the entire surface of the roller (The diameter is 61cm), It can guarantee the groove more accurately, no deviation and straightly.
7. The machine has the features of high accuracy, fast speed and durable cutting blade.
1. Each cutting blade could move left and right by itself.
2. Double sides position plate are adjustable. The can ensure the precision.
3. The belt press wheel could adjust the pressure of belt.
4. The counter is used for record the number of production.
5. The wheel is use for adjust grooving degree from 80-140.
6. Scrap remove equipment.
7. Special use knife grinder, usually grind one piece of cutting blade need 2 minutes only.
8. Cutting blade and holder.
9. Standby belt and 4kw adjustable speed Frequency converter.
Contact Person: Janey